SKU: RADIUM-ID-RAIL-WRX-1700

Radium/Injector Dynamics 1700X Top Feed Fuel Rail Upgrade Kit - Subaru WRX 01-14/STI 01-20/FXT/LGT


$2,190.00






SOME PRODUCTS DISPLAYED MAY ONLY BE SUITABLE FOR OFF-ROAD AND MOTORSPORT APPLICATIONS. IF IN DOUBT, PLEASE CONTACT YOUR LOCAL TRANSPORT AND ROAD AUTHORITY.


Available




Description

Radium Top Feed Upgrade Fuel Rails:

Note: Fuel Pulse Dampener (FPD) Not Included

Manufactured with a large internal bore, the fuel rails can support all necessary engine power requirements. They are CNC machined from solid 6061 aluminum, black anodized, and laser etched for a high quality surface finish.

These fuel rails are designed specifically for OEM or equivalent fitment injectors. For injector height flexibility and thermal insulation, 2 sets of machined phenolic spacers are included. All injectors must use 11mm diameter upper O-rings just like the OEM Subaru injectors. Reference instruction manual for more information.

The fuel rails are compatible with all fuel types including popular alcohol mixtures such as E85.

These fuel rails have the same mounting and injector spacing as the Radium 20-0479-02 Top Feed Rails. However, these fuel rails feature a 8AN ORB port machined in the underside center of each fuel rail.

NOTE: The centre port bulge can create an interfere with early AVCS solenoids with the vertical connector (pictured above) found in the EJ207 and EJ205. If this is the case, use P/N: 20-0479-02.

 

Included:

  • Black Anodized Laser Etched Aluminum Fuel Rails (x2)
  • Phenolic Thermal Insulating Press-In Spacers, 20mm (x4)
  • Stainless Steel M8x1.25 Mounting Bolts (x4)

The fuel rail ports are tapped for 8AN ORB but fittings are not included.

Appropriate fittings must be selected based on the specific application. Ample space around the fuel rail port(s) is necessary for larger accessories such as fuel pressure regulators, fuel pressure gauges, and fuel pulse dampers. To verify clearance, the dimensional drawings on the product pages can be used as a reference guide.

 

Injector Dynamics ID1700X:

The ID1700x is the most recent offering from the partnership of Injector Dynamics and Bosch Motorsport. The ID1700x was designed to fill the gap between the ID1300x and the ID2000, and like the ID1300x, it features corrosion resistant internals making it compatible with all known automotive fuels.
A unique magnetic circuit, resulting from a lengthy development program, makes the ID1700x immune to voltage and pressure sensitivity problems that plague other high impedance high flow injectors. The ID1700x excels at high pressures typical of current automotive systems, and will perform flawlessly in these applications.

The ID1700x was designed to be an all fuel compatible injector, capable of very high flow rates. As such, it will most often be used to deliver E85 to boosted engines, or occasionally, gasoline in extreme high horsepower applications. Neither of these applications requires extended linearity at low flow rates, and so this was given a proportionately lower priority during the design process.

The ID1700x will deliver flawless stoichiometric idle and cruise mixtures on E85, but like the ID2000, should not be expected to do so on gasoline.

If you need flawless drivability on gasoline, the ID1300x will provide this, and is capable of approximately 150hp per injector on E85.

 

Basic Specifications:

  • Nominal Flow Rate: 1725cc/min @ 3.0 Bar (43.5 psi) Using Iso-Octane at 52 Degrees C (125 Degrees F)
  • Maximum Differential Fuel Pressure: 7.0 Bar (101.5 psi)
  • Fuel Compatibility: Compatible with Methanol/Ethanol/All Known Hydrocarbon Fuels.
  • Electrical Connector: USCAR

 

Specifications

SKU RADIUM-ID-RAIL-WRX-1700
Brand RADIUM ENGINEERING
Shipping Weight 20.0000kg

More From This Category